Skip to main content
Print

Hera Backup Hub (Managed Cloud Storage)

Hera Backup Hub is Hera's own cloud storage for your backups, part of Hera Backup Pro. It gives you offsite backup storage without creating or configuring any third-party accounts: no keys, no buckets, no OAuth.

Before you start

  • Hera Backup and Hera Backup Pro must be installed and activated. Without Pro, the Hera Backup Hub card says "Hera Backup Hub needs Hera Backup Pro" and offers Upgrade to Pro.
  • You need a Hera Backup licence that includes Hera Backup Hub, and your site must be connected to your Hera account (see Connecting Your HeraPress Account). Hub uses that connection to authenticate the site's uploads.
  • Your server needs the PHP sodium extension with Argon2id support, because every Hub backup is encrypted on your site before upload.

What Hera Backup Hub is

Every backup is encrypted on your own site before it is uploaded, with a key that only your Hub password or your recovery key can unlock. Hera never receives either of them, so nobody at Hera can open your backups, and nobody can open them for you if you lose both. Files travel over HTTPS. A Hub backup you download is still encrypted, and opens with Hera Backup Pro and your Hub password or recovery key.

How much space you have

How much Hub space you have depends on your plan. The space belongs to your Hera account and is shared by every site connected to it. Once Hub is active, the Hub card shows it (see Checking your usage below).

Activating Hera Backup Hub

  1. Go to Hera Backup > Storages.
  2. Find the Hera Backup Hub card (the first card) and click Activate Hub.
  3. When activation succeeds, the card shows Active, how much space this site's backups use, and your account's used and free space. There are no keys or settings to enter.

If activation is refused, or the site still has to be connected, the card says why and offers the way forward:

  • No licence on the site: Connect Hera account or Enter licence key.
  • The licence does not include Hera Backup Hub, or has expired: Renew.
  • The site is not connected to your Hera account: Connect Hera account.
  • Hera Backup Hub did not answer: Try again.

Setting up encryption (required)

Nothing is uploaded to Hub until this is done. Until then the Hub card says "Hub backups are paused until you set up encryption", Hera Backup Hub cannot be chosen as a backup's destination ("Set up Hub encryption first"), and a scheduled backup already set to Hera Backup Hub fails with its finished archive kept in your local backup folder.

  1. On the Hub card, click Set up encryption (or click Settings on the Hub card; the setup comes first on that screen).
  2. Choose a Hub password and enter it again under Type it again. It must be at least 12 characters, and either 16 characters or more or one the strength meter rates Strong. A few unrelated words make a good one.
  3. Click Continue. Your recovery key is shown: 52 letters and digits in groups of four. It is shown only this once. Click Download recovery key (or Copy) and keep it somewhere other than your website.
  4. Type the last four characters of the recovery key and click Finish setup.

The card then says "Encrypted on this site before upload", and Hera Backup Hub can be chosen as a destination. Scheduled backups are encrypted the same way; they need neither you nor the password to be present.

If the PHP sodium extension (or its Argon2id support) is missing, the Hub card and the setup screen say so; ask your host to enable PHP sodium.

Using Hub as a backup destination

Once encryption is set up:

  1. When creating a backup, choose Hera Backup Hub under Storage Location.
  2. When creating a schedule, choose Hera Backup Hub as the schedule's Storage Location.
  3. The backup is built on your server, encrypted, and uploaded to Hub. Once the upload succeeds, no copy of the archive is kept on your server.

Each backup goes to one destination. For both a fast local copy and a safe offsite copy, run one schedule to Local Disk and another to Hera Backup Hub.

How many backups Hub keeps

Click Settings on the Hub card. Under Retention, Max backups to keep (0 = unlimited) is counted per schedule: when a scheduled backup finishes, that schedule's older backups on Hub beyond this number are deleted. Manual and imported backups, the recovery point and the backup last restored are never deleted automatically. At 0, nothing is removed automatically. Click Save. See Storage Retention and Cleanup.

Restoring a Hub backup

When you restore a backup stored on Hub, the restore screen asks for the Hub password it was made with. Click Use recovery key instead if you have forgotten the password. If the backup also has its own backup password, enter that too.

  • On a new or rebuilt site: install Hera Backup and Hera Backup Pro, activate Hub and connect the site to the same Hera account. Click Manage Backups on the Hub card, open All Hub files, choose the old site (or All sites of the account) under Site, and click Import to this site on the backup (or Download it and upload it under Hera Backup > Import). Enter the Hub password or the recovery key when asked.
  • From the command line: wp hera-backup hub decrypt <file> opens a downloaded Hub file (add --recovery-key to use the recovery key). The secret is asked for at a hidden prompt. See Using WP-CLI Commands (Pro).
  • Without the WordPress admin: the Recovery Installer (Hera Backup > Tools > Disaster Recovery, Download Recovery Installer) opens Hub backups too, when it was downloaded from a site with Pro. See Standalone Restore.

Changing the Hub password, or starting over

Click Settings on the Hub card:

  • Change Hub password: prove it is you with the current Hub password or the recovery key, then choose a new one. Backups already on Hub still open with the password they were made with, or with the recovery key.
  • Reset encryption: makes a new key, Hub password and recovery key. You must tick that you still have the old recovery key, or do not need the backups already on Hub. Those backups then open only with the old Hub password or the old recovery key, so keep the old recovery key.

If you lose the Hub password or the recovery key

  • Lost the password: use the recovery key, which opens every Hub backup made under that key, and set a new password with Change Hub password.
  • Lost the recovery key but still know the password: everything keeps working. Consider Reset encryption to get a new recovery key, and keep the old password for the backups made before.
  • Lost both: the backups on Hub cannot be opened by anyone, including Hera.

Checking your usage

  1. Go to Hera Backup > Storages. The Hub card shows what this site keeps on Hub (its size and number of backups) and your whole account's used and free space, with a meter that turns amber at 80% and red at 95%.
  2. To see the files, click Manage Backups on the Hub card. It opens Hera Backup > Backups showing this site's Hub backups; under All Hub files, choose All sites of the account under Site to list every file on your account, with the site it came from.

When the space is full

When Hub space is over 90% used, the Storages screen shows "Hub storage almost full". Before a one-time backup to Hub, the backup form compares the estimated backup size (when it has one) with your free space and warns you when it will not fit.

If an upload would exceed your free space, it is refused with "Your Hub storage is full, so this backup was not stored". The backup is marked failed, and its finished archive is kept in your local backup folder. Free space by deleting older Hub backups, or click Add storage on the Hub card to buy more, then run the backup again.

Table of Contents